colored flame






You can also color the fire in various colors.The following shows a list of chemicals and how they affect the fire. Fire dyes:
ways: The first input of alcohol, gasoline, or kerosene (combustible material) into a glass beaker (to the others) and then enter the material presented below (choose one) and mix evenly and wait for 30 seconds, and all had so just stay put in a place that is not flammable (plate glass, floor, etc.) and then burn the solution.

Scarlet - Lithium Chloride
Red - Strontium Chloride
Orange - Calcium Chloride (bleaching powder)
Yellow - Sodium Chloride (table salt) or Sodium Carbonate
Yellowish Green - Borax
Green - Copper Sulfate or Boric Acid
Blue - Copper Chloride
Violet - 3 parts Potassium Sulphate, Potassium Nitrate 1 part
Purple - Potassium Chloride
White - Magnesium Sulfate (Epsom salts)
attention!!! : Not in the shake (in places you do this experiment) if you shake the fire easily grab and spill.

Glowing water




How to Make Glowing Water Without a Black Light thumbnail

Making glowing water is entertaining and safe. Exposing fluorescent-dyed water to create ultraviolet light and luminous. Using light-emitting diode (LED) to produce the same effect without the ultraviolet light shining, otherwise known as a black light. Electromagnetic spectrum to move the frequency and wavelength in the order of ultraviolet violet to blue. Apply light blue or purple glass LED fluorescent-dyed water to make it glow without a black light.

ingredients:
rubber gloves
water
sticks glow in the dark / highlighters / markers glow in the dark
1 botal empty mineral water
glass
scissors
LED lights


How to:
wear gloves
make light sticks (see packaging), if the markers / highlighters open the lid / body cut up to look inside (ink spot)
prepare the water in the glass / bottle (if you want to keep and use again)
scissors stick / place until the liquid ink into a glass / bottle
mix well
luminous water was so
The most important thing to do: This experiment was done in the dark to take more good results.


Addendum: If you want to keep should be in a dark place (recommended) / place protected from sunlight. If you want more light you should dye / put LED lights (color according the water) in the bottom of the glass, and turn on the LED lights will make the water more beautiful.

Caution: in drinking water should not


Add Multi-Color Effect For Your Links On Hover For Blogger BlogsHow to add Cool effect to your links when your visitors hover it.
It’s easy and one step processes.

                                                                                                                                                                                     

How To Add It.

Go To you blogger dashboard, and navigate to : Dashboard >> Layout >> Edit html, And find the following code or Press Ctrl + F
And find:

</head>
And exactly above it add the next code :
 <script type='text/javascript'>

 //<![CDATA[

 var rate = 20;

 if (document.getElementById)
  window.onerror=new Function("return true")

 var objActive;  // The object which event occured in
  var act = 0;    // Flag during the action
  var elmH = 0;   // Hue
  var elmS = 128; // Saturation
  var elmV = 255; // Value
  var clrOrg;     // A color before the change
  var TimerID;    // Timer ID

 if (document.all) {
  document.onmouseover = doRainbowAnchor;
  document.onmouseout = stopRainbowAnchor;
  }
  else if (document.getElementById) {
  document.captureEvents(Event.MOUSEOVER | Event.MOUSEOUT);
  document.onmouseover = Mozilla_doRainbowAnchor;
  document.onmouseout = Mozilla_stopRainbowAnchor;
  }

 function doRainbow(obj)
  {
  if (act == 0) {
  act = 1;
  if (obj)
  objActive = obj;
  else
  objActive = event.srcElement;
  clrOrg = objActive.style.color;
  TimerID = setInterval("ChangeColor()",100);
  }
  }


 function stopRainbow()
  {
  if (act) {
  objActive.style.color = clrOrg;
  clearInterval(TimerID);
  act = 0;
  }
  }


 function doRainbowAnchor()
  {
  if (act == 0) {
  var obj = event.srcElement;
  while (obj.tagName != 'A' && obj.tagName != 'BODY') {
  obj = obj.parentElement;
  if (obj.tagName == 'A' || obj.tagName == 'BODY')
  break;
  }

 if (obj.tagName == 'A' && obj.href != '') {
  objActive = obj;
  act = 1;
  clrOrg = objActive.style.color;
  TimerID = setInterval("ChangeColor()",100);
  }
  }
  }


 function stopRainbowAnchor()
  {
  if (act) {
  if (objActive.tagName == 'A') {
  objActive.style.color = clrOrg;
  clearInterval(TimerID);
  act = 0;
  }
  }
  }


 function Mozilla_doRainbowAnchor(e)
  {
  if (act == 0) {
  obj = e.target;
  while (obj.nodeName != 'A' && obj.nodeName != 'BODY') {
  obj = obj.parentNode;
  if (obj.nodeName == 'A' || obj.nodeName == 'BODY')
  break;
  }

 if (obj.nodeName == 'A' && obj.href != '') {
  objActive = obj;
  act = 1;
  clrOrg = obj.style.color;
  TimerID = setInterval("ChangeColor()",100);
  }
  }
  }


 function Mozilla_stopRainbowAnchor(e)
  {
  if (act) {
  if (objActive.nodeName == 'A') {
  objActive.style.color = clrOrg;
  clearInterval(TimerID);
  act = 0;
  }
  }
  }


 function ChangeColor()
  {
  objActive.style.color = makeColor();
  }


 function makeColor()
  {
  // Don't you think Color Gamut to look like Rainbow?

 // HSVtoRGB
  if (elmS == 0) {
  elmR = elmV;    elmG = elmV;    elmB = elmV;
  }
  else {
  t1 = elmV;
  t2 = (255 - elmS) * elmV / 255;
  t3 = elmH % 60;
  t3 = (t1 - t2) * t3 / 60;

 if (elmH < 60) {
  elmR = t1;  elmB = t2;  elmG = t2 + t3;
  }
  else if (elmH < 120) {
  elmG = t1;  elmB = t2;  elmR = t1 - t3;
  }
  else if (elmH < 180) {
  elmG = t1;  elmR = t2;  elmB = t2 + t3;
  }
  else if (elmH < 240) {
  elmB = t1;  elmR = t2;  elmG = t1 - t3;
  }
  else if (elmH < 300) {
  elmB = t1;  elmG = t2;  elmR = t2 + t3;
  }
  else if (elmH < 360) {
  elmR = t1;  elmG = t2;  elmB = t1 - t3;
  }
  else {
  elmR = 0;   elmG = 0;   elmB = 0;
  }
  }

 elmR = Math.floor(elmR).toString(16);
  elmG = Math.floor(elmG).toString(16);
  elmB = Math.floor(elmB).toString(16);
  if (elmR.length == 1)    elmR = "0" + elmR;
  if (elmG.length == 1)    elmG = "0" + elmG;
  if (elmB.length == 1)    elmB = "0" + elmB;

 elmH = elmH + rate;
  if (elmH >= 360)
  elmH = 0;

 return '#' + elmR + elmG + elmB;
  }

 //]]>

 </script>

Now Click Save Template 

- Copyright © No TITLE - Hatsune Miku - Powered by Blogger - Designed by Johanes Djogan -